Brother DS-940DW Scanner Driver on Windows: Portable Setup Without the Cord Drama

Most people plug the DS-940DW in, see Windows do absolutely nothing, and start hunting for a USB driver package they don’t need. The DS-940DW is a wireless portable document scanner, and the driver story on Windows runs through Wi-Fi and the Brother install chain, not a cable handshake. Get that assumption out of the way first and the rest of setup gets simple.

What “driver” actually means for this scanner

Brother ships the DS-940DW as a network-first device. On Windows you’re dealing with three separate pieces: the scanner driver itself, a scanning management utility that gives you buttons and profiles, and the Wi-Fi connection layer that ties them together. They install together from one Brother package. Pull that package from the Brother support page for the DS-940DW specifically, not from a third-party driver aggregator. I’ve fixed enough machines where a generic “driver updater” had shoved in something mislabeled to stop trusting any of them.

Download the full software suite, not just a bare driver file. On the DS-940DW the utility is what actually makes the scanner usable day to day. Without it you can still scan through Windows’ built-in fax and scan tool, but you lose the one-touch workflows and the DSmobileCapture-style front end that the hardware is designed around.

Wireless setup, in the order that avoids headaches

Run the installer before you power the scanner on. Brother’s utility walks you through Wi-Fi configuration, and it expects to see the scanner appear mid-install. If the device is already on and connected to some other network, the wizard gets confused and you end up re-running the whole thing.

  1. Download the DS-940DW Windows package from Brother’s support site.
  2. Close anything open on the desktop. Run the installer as administrator.
  3. When it asks about connection type, choose wireless.
  4. Let the wizard find your network. Enter the Wi-Fi password when prompted.
  5. Power the scanner on only when the wizard tells you to. Set it in pairing mode if it doesn’t auto-detect.
  6. Finish the install, then run a test scan before you call it done.

If your laptop lives on a different network than the scanner (a guest SSID, a mesh node with client isolation on), the install will hang at the detection stage. That’s not a driver problem. Move both devices to the same 2.4 GHz band, retry. The DS-940DW is a portable unit and 5 GHz support varies by region firmware, so the 2.4 GHz band is the safe bet.

Windows 11 and the protected print mode wrinkle

Here’s the thing that trips up more people than any scanner bug: newer Windows 11 builds ship with Windows protected print mode enabled by default on some configurations. Brother’s own documentation is blunt about it. Windows protected print mode “prevents third-party printer drivers from interacting with the Windows operating system,” and some Brother drivers and applications simply aren’t available while it’s turned on.

You have two paths. Turn it off if you want the full Brother feature set. Or leave it on and use the Brother Print Support App, which operates through the Microsoft IPP Class Driver and re-enables features that used to require the full driver stack. That second option is newer and, honestly, worth trying first if you’re already on a locked-down machine. Fewer moving parts, no protected-mode toggle.

Turning protected print mode off

Open Settings, go to Bluetooth & devices, then Printers & scanners. Scroll to Printer preferences and look for Windows protected print mode. If you see a “Turn off” button, click it and confirm. If you see “Set up” instead, the mode is already off. Close the window and re-run the Brother installer.

Brother adds a fair warning with this option, and I’ll repeat it plainly because it’s true: once protected mode is off, any third-party printer driver can also install and interact with the OS. Not just Brother’s. If you share that PC with people who install random peripheral software, weigh that.

When the install claims success but nothing scans

Check Device Manager first. Right-click Start, pick Device Manager, and expand the imaging devices or printers category. If the DS-940DW is sitting there with a yellow warning triangle, the connection is fine but the driver binding failed. Right-click the device, pick Update driver, then hit Browse my computer for drivers, and aim it at the folder Brother’s installer dropped off (typically buried somewhere under Program Files, though the exact path shifts with each package build, so trust the installer to show you). Windows will either take the newer files or report that the best drivers are already installed, which tells you the driver isn’t the problem.

If there’s no warning triangle at all and the device just won’t appear in the scanning utility, the Wi-Fi link is the culprit. The scanner and the PC aren’t talking. Re-run Brother’s wireless setup tool from the start menu. Rebuild the connection from scratch rather than trying to patch it.

Full uninstall before reinstall, every time

Don’t stack a new install on top of a broken one. Brother’s own support notes tell you to uninstall existing drivers via Brother Utilities before reinstalling. Skipping that step is why half the “I reinstalled it and it still won’t work” cases exist. The installer detects the old registry keys, thinks the job is done, and exits.

  • Open Brother Utilities from the Start menu.
  • Choose Uninstall for the scanner software and drivers.
  • Reboot. This matters. The scanner driver leaves a service behind that won’t release until the machine restarts.
  • Run the downloaded installer fresh.

USB as a fallback, not a first choice

The DS-940DW does have a USB port, and you can use it when Wi-Fi is genuinely impossible. But the install flow is clumsier and treats USB as a second-class citizen. The all-in-one wireless package assumes it’s setting up a network device, and the USB path sometimes won’t auto-detect the scanner if another USB printer already occupies the same bus. It works. It’s just fiddly. If you’re the type who moves the scanner around between desks, get the Wi-Fi stable once and leave it.

Version and update reality check

Brother update drivers slowly. The DS-940DW is a niche portable unit and you’ll see firmware and software packages refresh far less often than a mainstream MFC. Check the support page a couple times a year, not weekly. When a new version does appear, read the release notes before you install. Driver updates fix specific bugs; they also occasionally break working configurations. Don’t update a scanner driver that’s already doing its job unless you’re chasing a documented problem.

One more thing: if you ever get asked to roll back after a bad update, Windows keeps old driver versions. Go through Device Manager, right-click the scanner, choose Properties, then the Driver tab, and check whether Roll Back Driver is available. If Windows doesn’t have an older version cached, you’ll need to grab the previous release from Brother’s support page manually and install it through Browse my computer for drivers. Keep the installer file for whatever version works. Archive it in a folder you’ll actually remember.

The DS-940DW doesn’t need a heroic setup. It needs wireless configured in the right order, protected print mode sorted out before you blame the driver, and a clean uninstall between attempts. Do those three and the cord drama mostly evaporates.